Filter
Top Products
Basic Operations 25
N
o
t
f
o
r
c
o
m
m
e
r
c
i
a
l
u
s
e
-
E
ri
c
s
s
o
n
I
n
c
.
stored in the phonebook, the name stored with the phone number is
also shown when the call is received.
1 Open the flip to answer the call. If the flip has been deactivated in
the
ANSWER OPT menu, answer the phone by opening the flip
and pressing
YES. The words Incoming Call are replaced by
the call timer display.
2 When you finish your conversation, press
NO or close the flip to
end the call.
Temporarily Muting the Ring Tone
To temporarily mute the ring tone without answering the call, press
either the upper or lower side key, or if the flip is open, press
NO.
Incoming Call is still shown in the display, and you can still
answer the call by opening the flip or by pressing
YES.
Note! Do not use the
NO key to mute the ringer if the flip is closed and
active. Opening the flip will answer the call. Pressing
NO will end
the call.
Muting the Microphone During a Call
To mute the microphone during a call, press and hold the CLR key.
Mic Muted appears in the display when the call is muted. Repeat
this procedure to return to your call.
Note! If your flip has not been set to answer or end the call, then closing
the flip mutes the call, and opening the flip disables the mute and
resumes your call.
Increasing or Decreasing Ear Volume During a Call
To adjust the ear volume during a call:
• Press the upper side key to increase the ear volume.
• Press the lower side key to decrease the ear volume.
Call Waiting
If you have call waiting service from your service provider, press YES
to answer a call when you receive the call waiting signal. You can
switch between the two calls by pressing
YES. Do not press NO until
you are ready to end both calls.
Unanswered Calls
Your phone's display shows the number of calls you have received
but did not answer. You can clear the number from the display by
pressing any key or by turning the phone Off.
If Caller Number Identification is available from your carrier,
unanswered calls will be stored in the
Incoming Log of the
PHONE LISTS menu. To quickly access your Incoming Log,
press
YES from the Missed Call Indicator screen shown below.
Note! When the flip is open, pressing the upper or lower side key will
turn on the back light without clearing the display. This is useful
at night when checking for missed calls.