Filter
Top Products
Data, Fax, and Internet Calls 59
N
o
t
f
o
r
c
o
m
m
e
r
c
i
a
l
u
s
e
-
E
ri
c
s
s
o
n
I
n
c
.
Review the instructions from your mobile service provider that
describe the procedures and rules for making and receiving data calls
in your area.
Note! Your phone will remain in Data/Fax profile until your phone cable
is disconnected.
Note! To avoid unnecessary airtime charges, terminate your data calls as
soon as you have finished transferring files by pressing the
NO key.
Some software can be set to do this automatically.
Making Voice Calls While Connected to Your Computer
You can originate voice calls while your phone is in Data/Fax profile
and you are not on a data call. You can receive voice calls if the
NextCallType is set to Voice Call.
Your Ericsson mobile phone enables you to initiate voice calls from
Windows applications when connected to the Ericsson Voice Call
Dialer. This is particularly useful if you have contact cards with
phone numbers in a contact management application. You can open
a contact card, click on the phone icon, and originate a call using
your Ericsson mobile phone. Then you simply pick up your mobile
phone and continue the call. The Ericsson Voice Call Dialer is
compatible with most contact manager software packages. Refer to
the “Manual Installation of Your Modem Driver” or “Voice Call
Dialer” section at the end of this chapter for help with installing this
driver for some operating systems.
Disconnecting
Disconnect your Ericsson mobile phone from your computer by
disconnecting the cable from your phone and the serial port from
your computer. When your fax program is stopped or when your
interface cable is disconnected, your phone will exit Data/Fax profile
and return to the previously selected profile.
Use With Other Ericsson Accessories
Rapid or Travel Charger
To charge your phone’s battery with an Ericsson rapid or travel
charger during data operation, do the following:
1 Plug one end of the cable from your DA 18 Phone Book Manager
Accessory Kit into your phone.
2 Plug the other end of the cable from your DA 18 Phone Book
Manager Accessory Kit into the serial port on your computer.
3 Plug the charger cable into the bottom of the connector from your
DA 18 Phone Book Manager Accessory Kit cable.
4 Plug the charger cable into the wall outlet.