Filter
Top Products
LOCATION 24 EVENT SELECTION FOR REPORT CONTROL 6 BY PARTITION (16 segments, feature selection
data)
All events for report control 6 are disabled by default. See location 4.
LOCATION 25 PRIMARY REPORTING FLAG FOR REPORT CONTROLS (1 segment)
The NX-7002 contains up to six report controls. Turn on the relevant option to enable primary
reporting for that report control. Turn off the option to enable secondary reporting for that
report control. When secondary reporting is enabled, the report control acts as a backup for
the control panel.
Segment 1 1 = On: Report Control 1 acts as Primary Reporting;
Off: Report Control 1 acts as Secondary Reporting
2 = On: Report Control 2 acts as Primary Reporting;
Off: Report Control 2 acts as Secondary Reporting
3 = On: Report Control 3 acts as Primary Reporting;
Off: Report Control 3 acts as Secondary Reporting
4 = On: Report Control 4 acts as Primary Reporting;
Off: Report Control 4 acts as Secondary Reporting
5 = On: Report Control 5 acts as Primary Reporting;
Off: Report Control 5 acts as Secondary Reporting
6 = On: Report Control 6 acts as Primary Reporting;
Off: Report Control 6 acts as Secondary Reporting
7-8 Reserved
LOCATION 26 –
LOCATION 31 RESERVED
LOCATION 32 PPP (dial-up account) USER ID, characters 1 - 16 (16 segments)
Optional if using TCP/IP reporting. Contact the network provider to confirm if a PAP login is
required and to obtain the user ID and password.
LOCATION 33 PPP (dial-up account) USER ID, characters 17 - 32 (16 segments)
See location 32.
LOCATION 34 PPP (dial-up account) PASSWORD, 16 characters (16 segments)
See location 32.
LOCATION 35 –
LOCATION 59 RESERVED
LOCATION 60 NAME OF GPRS ACCESS POINT - APN, characters 1 - 16 (16 segments)
This is a mandatory setting if using TCP/IP reporting. Contact the network provider to obtain
the GPRS access point name.
LOCATION 61 NAME OF GPRS ACCESS POINT - APN, characters 17 - 32 (16 segments)
See location 60.
NX-7002 Installation manual Page 17 09/02/05