Filter
Top Products
Synchronize Your nüvifone
nüvifone M10E Owner’s Manual 85
Enable the USB
Connection Mode Page
The USB Connection Mode page
allows you to select a USB connection
mode when you connect your device to
your computer using a USB cable.
1. Press the key.
2. Tap
Settings > Connections >
USB Setting.
3. Select the
Ask When I Connect
Device check box.
4. Connect the micro-USB plug to the
micro-USB connector on the side of
the device.
5. Connect the other end of the USB
cable to your computer. The USB
Connection Mode page appears.
6. Select an option.
7. Tap
OK.
Mass Storage Mode
Notice
If you are not sure about the purpose
of a le, do NOT delete the le. Your
nüvifone memory contains important
system les that should NOT be
deleted. Be especially cautious of les
located in folders entitled “Garmin” or
“System.”
You can use mass storage mode when
the computer does not have ActiveSync
installed.