Filter
Top Products
Removing the Battery
1. Place the terminal in Suspend mode.
2. Perform the steps illustrated below to remove the battery.
Installing the SIM Card and/or Replacing the Memory Card
A microSD memory card is pre-installed in the terminal. You can expand the
memory capacity by replacing the supplied card with a larger capacity
microSD or microSDHC card.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC memory cards with Dolphin terminals for maximum
performance and durability. Contact a Honeywell sales representative for
additional information on qualified memory card options.
Note: Format replacement microSD/SDHC card to Fat32 before initial use.
To install the SIM card and/or replace the memory card:
1. Place the terminal in Suspend mode.
2. Remove the battery door and battery.
1
2
3
6
4
5