Filter
Top Products
We recommend use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
Once the battery is installed, connect the terminal to one of the Dolphin 70e
Black charging peripherals to charge the battery.
Charging the Dolphin 70e Black
Dolphin terminals ship with the battery significantly discharged of power.
Charge the battery with a Dolphin charging device for a minimum of 4 hours
for the standard battery and 6 hours for the extended battery. When using the
70e-USB Charge/Communication cable to charge from a 500mA USB port on
a host device, charge the battery for a minimum of 6 hours for the standard
battery and 8 hours for the extended battery.
Note: Using the terminal while charging the battery significantly increases the time
required to reach a full charge.
We recommend use of Honeywell peripherals, power cables, and power
adapters. Use of any non-Honeywell peripherals, cables, or power
adapters may cause damage not covered by the warranty.
Dolphin 70e Black model terminals powered by Android are designed for use
with the following charging devices and cables: 70e-HB, 70e-CB, 70e-MB,
70e-MC, and the 70e-USB ADAPTERKIT.
Ensure all components are dry prior to mating terminals/batteries with
peripheral devices. Mating wet components may cause damage not
covered by the warranty.
HomeBase (Model 70e-HB)
The 70e-HB charger is designed for use with Dolphin 70e Black model
terminals, and battery part numbers BAT-STANDARD-01 (Li-ion 3.7V,
6.179 watt hour) and BAT-EXTENDED-01 (Li-ion 3.7V, 12.358 watt hour),
manufactured for Honeywell International Inc.
Use only a UL Listed power supply, which has been qualified by Honeywell
with output rated at 12VDC and 3 amps with the device.
!
!
!