Filter
Top Products
User Guide for the Kyocera Milan KX9B/KX9C Phones 1
1GETTING ST ARTED
Installing the battery
Your Kyocera Milan KX9B/KX9C phone comes
with a removable lithium ion (LiIon) battery.
Fully
charge the battery before using the phone.
To install the battery:
1. Hold the phone face down.
2. Toward the bottom
of the phone there is
a recess to aid you
in opening the
battery door. Use
your fingernail to
pull the battery door
away.
3. Place the battery in the
phone casing with the
metal contacts toward
the bottom of the
phone.
4. Place the battery door
tabs in the openings near the top of the phone.
5. Press the battery door
until it clicks into
place.
Note: Before you remove the battery, make sure
the phone is powered off.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter
to the jack on the bottom
of the phone.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Note: The battery will not charge if you use the
phone while it is connected to an AC adapter.
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.