Filter
Top Products
User Guide for the Kyocera Slider Remix KX5 Phone 23
5USING THE CAMERA
Tips before operating your
camera
• You cannot activate the camera while
on an active call or while browsing files in the
media gallery.
• Once the camera is active, the home screen
acts as the viewfinder.
• If you get a “Low memory” error, check your
resolution and quality compression settings.
See “Setting up the camera” on this page.
• If there is no activity within 45 seconds after
you turn your camera on, the camera quits
and returns to the previous launch point.
• Menu settings and options can only be
accessed when the camera is active.
Accessing camera and video
modes
The camera can be used with the slide open
or closed.
Slide closed
• Press until you hear one beep to
activate camera mode.
• Press until you hear two beeps to
activate video mode.
Slide open
• Press until you hear one beep to
activate camera mode.
• Press until you hear two beeps to
activate video mode.
Setting up the camera for
photos
1. With the slide open, select Menu → Camera.
2.
Press to select Options .
3. Press to select Settings.
4. Highlight an option and press :
– Flash options are On, Off, or Automatic.
– Resolution options are 1280 x 960 (best
for printing), 640 x 480, 320 x 240 (best
for sending to email), and 160 x 120.
–
Low Light Mode brightens the picture for
low light environments.
–
Self Timer options are Off (default) or 3,
5, or 10 second pauses. When set, the
camera beeps from 3 seconds down to the
time the shutter snaps the picture
automatically. Self Timer is not available
when
Multishot mode is activated.