Filter
Top Products
40 Convenience
Enable Airplane Mode
While in an airplane, it is normally required
that you turn off your mobile phone because it
emits RF signals that interfere with air traffic
control. In airplane mode, however, your
phone does not emit RF signals. You cannot
make or receive calls, send text messages, use
the Browser or Bluetooth, but you can play
games, use the Scheduler, set the clock, and
make emergency calls to designated
emergency numbers. Please check with
uniformed personnel before operating your
phone in Airplane mode.
From
Airplane Mode
, select
Enabled > OK
to activate airplane mode.
With airplane mode enabled, you can also set
the time and date manually.
Enable Auto-Hyphenation
Auto-hyphenation, when enabled,
automatically inserts hyphens into your phone
numbers to be consistent with the U.S. dialing
plan (or the North American Numbering Plan).
From
Auto-Hyphen
, select
Enabled
to turn on
auto-hyphenation.
Use 1-Touch Dialing
The 1-Touch Dialing feature is the fastest way
to call a speed dial location. To call a contact
with speed dial, press and hold the speed
dialing location.
If it is a two-digit location, press the first digit
briefly, then press and hold the second digit.
Note:
To use 1-Touch dialing, you must enable
1-Touch dialing on your phone and have a
speed dial location assigned to a contact.
From
1-Touch Dialing
, select
Enabled
to turn
on 1-touch dialing.
Answer Hold
Enable Hold Call
Use
Answer Hold
to place incoming calls on
hold until you are ready to answer them.
1. From
Answer Hold
, select
Enabled
.
If you have not recorded a hold message,
you need to record one, such as “Please
hold. I’ll answer in a minute.”
2. Record the message twice, as prompted.
3. Select
Save
or
Options
and one of the
following:
–
Play
to replay your message.
–
Re-Record
to record your message
again.
–
Exit
to exit.
The next time a call comes in, you can place it
on hold.
Place a Call on Hold
You can place a call on hold with
Answer
Hold
enabled.
Note:
If you are already on a call and you
receive another call, you cannot place the
incoming call on hold. With no call waiting
enabled, the call goes to
Voicemail
.