Kyocera S2100 Cell Phone User Manual


 
User Guide 47
Use Voice Training
If your phone has trouble recognizing your
voice, you can train your phone to recognize
your specific voice for numbers.
1. From
Voice Training
, read the message
and select
OK > Train Numbers > OK
.
2. Follow the prompts for each number until
training is complete.
Note:
You must read the numbers digit by digit
for voice training to work.
Accessories
Set Headset Sounds
With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
From
Headset Sounds
, select
Out of Phone
(ringing from the phone speaker) or
Out of
Headset
(ringing from the headset).
Enable Auto-Answer
From
Auto-Answer
, select
After 5 Seconds
.
The phone automatically answers after five
seconds with a headset attached.
Set Com Port Speed
From
Com Port Speed
, select a data rate at
which your phone connects to a laptop or PC.
Check with your service provider for details.
Connect to TTY Device
You can connect the phone to a teletype (TTY)
device for the hearing impaired. (TTY device
sold separately.)
Note:
Enable TTY only when using the phone
with a TTY device.
1. Connect the TTY device to your phone.
2. From
TTY Device
, select
OK
to clear the
notification.
3. Select one of the following:
TTY Off
disables TTY.
TTY On
enables TTY devices.
TTY On + Talk
enables TTY devices
and voice carry over.
TTY On + Hear
enables TTY devices
and hearing carry over.
Note:
You can also enter
##889
with your
keypad and select
TTY
to enable TTY.
Connect to Hearing Aid Device
With a T-coil hearing aid device (sold
separately) connected, you can enable the
hearing aid feature.
1. Connect the T-coil hearing aid device to
your phone.
2. From
T-coil Hearing Aid
, select
OK >
Enabled
.