Kyocera S2100 Cell Phone User Manual


 
64 Camera Tips
9 Camera
Camera Tips
Your phone has a camera. Before using your
phone’s camera, here are some tips:
You cannot activate the camera while on an
active call or while browsing the Internet.
Once the camera is active, the home screen
acts as the viewfinder.
If you get a “Low memory” error, check
your resolution and quality compression
settings.
If there is no activity within 30 seconds
after you turn your camera on, the camera
times out and returns to the previous launch
point.
Menu settings and options can only be
accessed when the camera is active.
Numbers in the top right corner indicate the
number of snapshots remaining before the
phone runs out of memory.
Take a Picture
1. To activate the camera, press and hold the
Camera
key. You can also select
Camera
from the main menu.
2. Focus on the image using the phone’s
display as a viewfinder.
3. To take a picture, press the
OK
key. The
picture is saved to
Camera Pictures
.
4. Select
Send > Via MMS
(to attach to a
multimedia message),
Via Bluetooth
(to
send to a Bluetooth-enabled device), or
To
Printer
(to print on a Bluetooth-enabled
device).
Select
Erase
to delete the picture from your
phone.
5. Press the
End
key to exit camera mode.
Note:
If your phone has no Bluetooth feature,
you may send the file with a message only.
Camera Options
Camera Settings
Adjust the Resolution
From camera mode, select
Options > Settings
> Resolution
and a size for your pictures.
Numbers in the bottom left corner indicate the
current resolution setting.
Set Self Timer
From camera mode, select
Options > Settings
> Self Timer
and a time.
The icon indicates the timer is activated.
When you take a picture, a beep plays three
seconds from the time the shutter snaps the
picture.