LG Electronics 100 Cell Phone User Manual


 
aria 186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
20
Wake-up Call
Button Procedures
To register wake-up time,
Press TRANS/PGM button.
Dial 4 1 and 4-digit wake-up time (HHMM) in 24-hour mode. (HH = 00~23, MM = 00~59)
Press HOLD/SAVE button for “one-day” or dial # and HOLD/SAVE button for “until
canceled”. (Confirmation tone is heard.)
Range
The system automatically sends ring signal to a station which registers a wake-up time. There are
two kinds of wake-up call, one is effective for one-day, the other is effective until canceled.
To cancel wake-up call,
Press TRANS/PGM button and dial 4 2.
Press HOLD/SAVE button. (Confirmation tone is heard.)
Programming Your Name into Display
Procedures
Press TRANS/PGM button.
Press SPEED button and dial 0 0.
Press SPEED button.
Enter your name. (up to 7 letters using the code in “Storing Dial by name.)
Press HOLD/SAVE button.
Range
You can program your name and people using display phones will see your name instead of your
station number.
Button
Press TRANS/PGM button and dial 7 7
Dial the number of desired message. Date, Time or Station Number if required.
Press HOLD/SAVE button. (DND/FWD button is flashing.)
0 1 LUNCH, RETURN HH:MM
0 2 ON VACATION / RETURN AT MM:DD
0 3 OUT OF OFFICE/ RERURN TIME HH:MM
0 4 OUT OF OFFICE/ RETURN AT MM:DD
0 5 OUT OF OFFICE/ RETURN UNKNOWN
0 6 CALL : XX.... (Telephone number: Max. 17 digits)
0 7 IN OFFICE/STA XXXX
0 8 IN A MEETING / RETURN TIME (HH:MM)
0 9 AT HOME
1 0 AT BRANCH OFFICE
# to cancel
1 1 ~ 2 0 are used for customized messages which are
programmed by attendant. (See “Creating Customized Message”)
Button
Procedures
Range
You can select a pre-assigned message to be displayed on the LCD of the phone calling the station.
Pre-selected Message
To turn off message display,
Press flashing DND/FWD button.
System Features