LG Electronics 100 Cell Phone User Manual


 
aria 186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
22
Voice Announcement (Cont'd)
Button Procedures Range
Record paging message;
Dial * 2 2 8.
Lift handset to record your paging message.
Press HOLD/SAVE button after recording.
Confirm paging message;
Dial * 2 2 9.
The paging message is heard.
Record Busy Greeting;
Dial * 2 2 #.
Lift handset to record your paging message.
Press HOLD/SAVE button after recording.
Delete `Busy’ Greeting;
Dial * 2 2 *.
Confirmation tone is Herd.
Activate Call Forward to DVU,
Lift handset or press MON button.
Press DND/FWD button. (or dial 4 9 )
Dial 7 or 8 (Select DVU forward type 1 or 2).
Go on-hook.
Deactivate Call Forward to DVU,
Lift handset or press MON button.
Press DND/FWD button.
Dial #.
Go on-hook.
On LKD-2N/S, 8D/S,
If a DVU message is left, the MSG lamp is flashing.
Dial * 6 7 or programmed CALLBK button to listen to the
recorded message.
The recorded message is heard and then the message is
automatically deleted.
Pressing HOLD/SAVE button while a message is played, the
next message is heard. (The current message is placed to
the last. If on the last message, message will replay)
Pressing programmed CALLBK button, the recorded message
is heard from the first.
If you don’t press HOLD/SAVE button any more, the current
message is deleted and other messages are remained.
Listen to the recorded message,
Press the flashing CALLBK button.
The recorded message is heard with the time and date.
Pressing HOLD/SAVE button, the current message is saved
and the next message is heard.
Pressing CALLBK button, the recorded message is heard from
the first.
Pressing CONF button, the current message is deleted.
The recorded caller’s message will not be erased without pressing CONF
button. But, the system power is off or system is reset, it will be erased.
The max. user recording time is about 250sec. (Default: 20sec: it can be
programmable with admin programming - PGM 44-BTN 16.)
System Features