Filter
Top Products
Installation
17
CHARGING THE BATTERY
Before connecting the charger to the phone you
must first check the battery is installed.
1. Ensure the battery is fully charged before using
the phone.
2. With the arrow on the plug facing down, push
the plug on the charger into the socket on the
side of the phone.
3. Connect the other end of the charger to the
mains socket. Use only the charger included in
the box with the phone.
4. The moving bars of the battery icon will stop
after charging is complete.
DISCONNECTING THE
CHARGER
Disconnect the travel adapter from the phone as
shown in the diagram. Make sure you pull by the
plug, not the cord.
- Do not force the connector as this may
damage the phone and/or the charger.
- If you use the charger out of your own
country, use an attachment plug adaptor
for the proper configuration.
- Do not remove your battery or the SIM
card while charging.
- There is risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to the maker's
instructions.
- Unplug the charger from the mains and
phone during lightning storms to avoid
electric shock or fire.
- Make sure that no sharp-edged items such
as animal teeth or nails come into contact
with the battery. There is a risk of this
causing a fire.
KE850_UK_0220 2007.2.20 9:23 AM Page 17