Filter
Top Products
In-Call Menu
23
Your phone provides a number of control
functions that you can use during a call. To access
these functions during a call, press the left soft
key [Options].
DURING A CALL
The menu displayed on the handset screen during
a call is different than the default main menu
displayed when in idle screen, and the options are
described below.
SPEAKER PHONE
During call you can activate speaker phone by
pressing the LOCK key and then pressing the [ ]
key.
MAKING A SECOND CALL
(NETWORK DEPENDENT)
You can get a number you wish to dial from the
phonebook to make a second call.
SWITCHING BETWEEN
TWO CALLS
To switch between two calls, press key or
the left soft key, and then select Swap call.
ANSWERING AN INCOMING
CALL
To answer an incoming call when the handset is
ringing, simply slide open the phone. If the phone
is already open press the key. The handset
is also able to warn you of an incoming call while
you are already on a call. A tone sounds in the
earpiece, and the display will show that a second
call is waiting.
This feature, known as Call waiting, is only
available if your network supports it. If Call
waiting is on, you can put the first call on hold and
answer the second, by pressing the left soft key.
REJECTING AN INCOMING
CALL
You can reject an incoming call without answering
by simply pressing the key.
During a call, you can reject an incoming call by
pressing the key.
MUTING THE MICROPHONE
You can mute the microphone during a call by
tapping the [Mute] key in the bottom right. The
handset can be unmuted by tapping the
[Unmute]. When the handset is muted, the caller
cannot hear you, but you can still hear them.
DTMF TONES WHILE
CALLING
To switch on DTMF tones while calling (e.g. to use
the phone with an automatic switchboard) tap
[Options] followed by Send DTMF – DTMF on.
Select DTMF off to disable DTMF tones. DTMF
tones are normally on.
The display and keypad backlights will turn
off after a few seconds while in a call if no
keys are pressed. To turn on the backlight
press any key. DTMF is not sent when the
backlight is off.
To activate the keypad in a call, press the
on the side.
KE850_UK_0220 2007.2.20 9:56 AM Page 23