Filter
Top Products
34
When you enter a service area, the phone displays
“Entering Service Area” message.
When you leave a service area, the phone displays
“Leaving Service Area” message.
4. Call Connect
(Menu )
Alert tone notify the user of the time when the call is
connected.
Display (
Menu
)
Backlight
(Menu )
Choose the settings of the LCD and keypad
backlight. “10 seconds” turns the backlight off 10
seconds after the last key was pressed. “30 seconds”
turns the backlight off 30 seconds after the last key
was pressed. “On when Cellcase open” means that
the backlight is always on while cellcase is open.
“Always off” means that the backlight is never on.
Banner
(Menu )
Allows you to enter or change the character field(up
to 16 characters) displayed on the main screen.
Press Soft Key 1 Opt and select [Edit] using the
[ ] key press Soft Key 1Sel , to make changes to
the existing banner. Enter the characters as you
would when storing a name tag to a memory
location. Then press Soft Key 1 Save .
Theme
(Menu )
You can set up the screen displayed on the LCD
screen in the standby mode. (Default, Star theme)
35
Language
(Menu )
Set the Multi-language feature as per your need.
Available language : English / Spanish
Version
(Menu )
View the software and PRL version.
System (
Menu
)
System Select
(Menu )
Choose setting to control which cellular company
your phone uses. Leave this setting as default
unless you want to alter the system selection.
(As instructed by your service provider.)
Home is B (Automatic
_
B, Automatic
_
A, Home only)
is displayed.
Set NAM
(Menu )
Select the phone’s NAM (Number Assignment
Module) if the phone is registered with multiple
service provides.
Auto NAM
(Menu )
Allows the phone to automatically switch to one of
the programmed Telephone No. if it is operating in
the corresponding service provider area.
Force Call
(Menu )
Make next call in analog mode. You have 30 seconds
to place an analog call. This feature is typically used
for data applications.