Filter
Top Products
30
Generate a Route (Time required: 2 minutes)
1. Select the Drive To option.
2. Select the Address option and choose the Type In Address
Option.
3. Enter the address for your desired destination.
4. AT&T Navigator will attempt to validate the address and prompt
you to confirm the address.
5. Once the address for your destination is confirmed, tap OK to
generate your route.
6. Congratulations! You have successfully generated your route.
Exiting AT&T Navigator
1. To exit AT&T Navigator, press the Esc key from the application main menu and
then the trackball to confirm the Exit selection.
*Maps and information may not be available for all locations
AT&T Navigator