Filter
Top Products
26
Your phone provides a number of control
functions that you can use during a call. To
access these functions during a call, press the
right soft key [Options].
During a Call
The menu displayed on the handset screen
during a call is different from the default main
menu displayed when in idle screen, and the
options are described below.
Making a Second Call
You can select a number you wish to dial from
the Address Book to make a second call. Press
the right soft key then select Address Book.
Swapping Between Two Calls
By using three methods, you can switch
between two calls.
1. Press the [send] key.
2. Press the left/right navigation key.
3. Press the right soft key and then select "
Swap Calls".
Answering an Incoming Call
To answer an incoming call when the handset
is ringing, simply press the [SEND] key.
The handset is also able to warn you of an
incoming call while you are already on a call. A
tone sounds in the earpiece, and the display
will show that a second call is waiting. This
feature, known as Call Waiting, is only
available if your network supports it.
If Call Waiting is on, you can put the first call
on hold and answer the second call, by
pressing the [SEND] key.
Rejecting an Incoming Call
You can reject an incoming call without
answering by simply pressing the [END]
key.
During a call, you can reject an incoming call
by pressing the [END] key.
Muting the Microphone
In open the slide, you can mute the microphone
during a call by pressing the left soft key
[Mute]. The handset can be unmuted by
pressing the left soft key [Unmute]. When the
handset is muted, the caller cannot hear you,
but you can still hear the caller.
In-Call Menu
CU720_Eng_1108 11/8/07 4:18 PM Page 26