Filter
Top Products
Settings
84
Auto Key Lock
(Menu 9.6.1)
This menu allows to set the time of Auto
Keypad Lock.
n Note
You cannot make emergency calls under the key
lock.
Lock Handset
(Menu 9.6.2)
You can use a security code to avoid
unauthorized use of the phone.
If you set phone lock to When Power On, the
phone will request a security code whenever
you switch the phone on. If you set the phone
lock to When SmartChip Changed, your phone
will request a security code only when you
change your SmartChip. If you set the phone
lock to Immediately, your phone will lock
immediately.
PIN Code Request
(Menu 9.6.3)
When the PIN code request feature is set to
‘On’, you must enter your PIN each time you
switch the phone on. Consequently, any person
who does not have your PIN cannot use your
phone without your approval.
n Note
Before setting the PIN code request feature to
Off, you must enter your PIN
The following [Options] are available:
] On: You must enter the PIN each time the
phone is switched on.
] Off: The phone connects directly to the
network when you switch it on.
Fixed Dial Number
(Menu 9.6.4)
This allows you to restrict your outgoing calls
to selected phone numbers, if this function is
supported by your SmartChip. The PIN2 code is
required.
] FDN On/Off
- On: You can only call phone numbers
stored in the Address Book. You must enter
your PIN2.
- Off: You can call any number.
] FDN List
n Note
Not all SmartChips have a PIN2. If your
SmartChip does not, this menu option is not
displayed.
CU720_Eng_1108 11/8/07 4:18 PM Page 84