LG Electronics TD7130 Cell Phone User Manual


 
LG-TD7130
63
LG-TD7130
62
Enable QNC: Activates QNC(Quick Network
Connection) in CSD(Circuit Switched Data) for all
data connections (dial-up, even WAP and BREW).
The connection speed for QNC is 14400, and
Dormant mode is not supported in this mode. When
you want to access data service outside CDMA 1x
coverage area of Telstra Mobile, but inside CDMA
Digital area, use this Enable QNC option.
Modem/Fax (Menu )
Sets the phone mode to receive the data from the other
party.
1. Press Soft Key 1 MENU.
2. Press Settings.
3. Press Modem/Fax.
4. Select the item of your choice by using , then
press .
G Deactivate / Modem / Fax
Voice Privacy (Menu )
Sets the voice privacy feature for CDMAcalls as Standard
Mode or Enhanced Mode. CDMA offers inherent voice
privacy.
1. Press Soft Key 1 MENU.
2. Press Settings.
3. Press Voice Privacy.
Chapter 3
Menu Features
Settings (Menu )
Call Answer (Menu )
1. Press Soft Key 1 MENU.
2. Press Settings.
3. Press Call Answer.
4. Select Open folder/Press key by using , then
press .
Connection (Menu )
Sets the data mode to dial-up networking service for
desktop or laptop computer to access Internet via a data
cable. The handset supports for a maximum data rate of
115Kbps. The actual speed may vary according to net-
work congestion, signal strength, and other variables.
1. Press Soft Key 1 MENU.
2. Press Settings.
3. Press Connection.
4. Select the item of your choice by using , then
press .
G 230400 / 115200 / 19200/Fax / Enable QNC
By default, the speed is set to 115200. Whenever you
try to change data speed with this menu, ensure that
the data speed of your PC is same as new one of
handset. The mobile phone will work with the PC
properly only when the serial port settings on both the
PC and your phone.
*TD7130_eng 03/9/20 3:26 AM Page 62