Filter
Top Products
LG-TD7130LG-TD7130
108
requirement for safe exposure. The tests are performed
in positions and locations (e.g., at the ear and worn on
the body) as required by the FCC for each model. The
highest SAR value for this model phone when tested for
use at the ear is 1.20W/kg and when worn on the body,
as described in this user guide, is 0.566 W/kg. (Body-
worn measurements differ among phone models,
depending upon available accessories and FCC require-
ments). While there may be differences between SAR
levels of various phones and at various positions, they all
meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels evaluated
as in compliance with the FCC RF emission guidelines.
SAR information on this model phone is on file with the
FCC and can be found under the Display Grant section
of http://www.fcc.gov/oet/fccid after searching on FCC ID
BEJRD7130.
Additional information on Specific Absorption Rates
(SAR) can be found on the Cellular Telecommunications
Industry Association (CTIA) website at http://www.wow-
com.com.
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard incor-
porates a substantial margin of safety to give additional
protection for the public and to account for any variations
in measurements.
Quick Connect Instructions
Windows 2000 Users
1. Select Phone and Modem options from the Control
Panel.
2. Choose the Modem tab and click Add.
3. Check the Don't detect modem is selected option
and click Next.
4. Choose Standard 19200bps Modem.
5. Select your available COM port(e.g. selected ports
COM1), click Next and Finish.
6. Under Phone & Modem options, select the newly
installed Standard 19200bps Modem and click
Properties.
7. Ensure Maximum Port Speed is set to 115200. This
will match the default setting of the handset. Click
OK to finish.
Windows XP Users
1. Install the modem by entering the Control Panel.
2. Click Switch to Classic View and execute Phone
and Modem Options.
3. Enter Modem tab. Click Add.
4. Click the Don't detect my modem option and click
Next.
5. Choose Standard 19200bps Modem.
6. Click selected ports and click COM1 Port and Click
Next.
109
APPENDIX
*TD7130_eng 03/9/20 3:27 AM Page 108