Filter
Top Products
VX8300 15
Getting Started with Your Phone
Battery Charge Level
You can find the battery charge level at the top
right of the LCD screen. When the charge level
becomes low, the battery sensor sounds a warning
tone, blinks the battery icon, and displays LOW
BATTERY WARNING! As the charge level
approaches empty, the phone automatically
switches off without saving.
Signal Strength
Call quality depends on the signal strength in your
area. You can tell how much signal strength you
have by the number of bars next to the signal
strength icon: the more bars, the stronger the
signal. If you’re having problems with signal quality,
move to an open area or, when inside a building,
try moving near a window.
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery or connect the phone to
an external power source such as a vehicle
power charger or hands-free car kit.
2. Press until the LCD screen lights up.
NOTE Like any other radio device, avoid contact with the
antenna while your phone is on.
Turning the Phone Off
1. Press and hold until the display turns off.
EmptyFully Charged
Chargers which have two grooves on the
bottom are NOT compatible with this
phone model. Inserting this type of charger
into the phone may damage the charging
port. This charger is compatible with the
VX1000, VX3200, VX3300, VX4650,
VX4700, VX5200, VX6100, VX7000,
VX8000, VX8100 and VX9800.
The correct charger has only one groove on
the bottom. This charger will work with all of
the above listed phones, as well as the
VX3400, VX3450, VX5300 and VX8300.
VX8300_2(E)_Rev1.3.qxd 2006.10.19 5:28 PM Page 15