Filter
Top Products
99
VX6100
98
VX6100
Driving Mode (Menu )
Allows you to switch hands-free calling on and off
during
driving without the need for a Car Kit.
1. Press , , ,
.
2. Use to select a setting, then press .
Activated / Deactivated
Announce Alerts
(Menu )
Allows you to notify caller ID and sender of message by voice.
1. Press , , ,
.
2. Use to select a setting, then press .
On / Off
Best Match (Menu )
Allows you to set the number of recognition results to display if your
voice command does not have an exact match in the phone's memory.
1. Press , , ,
.
2. Use to select a setting, then press .
1 Result Displays the name or number that best
matches the one you said.
4 Results Displays the four names or numbers that
best match the one you said and asks you if
the first one is correct. If you say "Yes," the
phone makes the call. If you say "No," the
phone suggests the second one in the
list, and so on, up to the fourth result.
NOTE:
When Announce Alerts is set, is displayed on the screen.
NOTE:
When flip is closed, you can press (Voice Dial Key)
for three seconds to set Driving Mode.
Using Phone Menus
Using Phone Menus
PC Connection (Menu )
Allows you to set the data port and port speed. Set the port
speed based on your carrier’s network. Contact your carrier to
determine the maximum available speed.
1. Press , , ,
.
2. Use to select a setting, then press .
USB / RS-232C(COM Port) / Closed
Voice Services (Menu )
Provides access to the voice services available with your phone.
Commands Prompt (Menu )
Allows you to set how you activate voice recognition.
1. Press , , ,
.
2. Use to select a setting, then press .
Flip open Activates voice recognition whenever you
flip open the phone. (When the phone is
already open, you activate voice recognition
by pressing the voice command key.)
Side key only Activates voice recognition when you
flip open the phone and press the voice
command key.
NOTE: When using 1X HSPD data service via an RS-232C data
cable, the port speed is set to 115,200 (230,400 is not
supported). When using 1X HSPD data service via a USB
data cable, you may get better port speed if the port
speed is set to 230,400 rather than 115,200.
VX6100-(E)small.QXD 9/15/04 6:16 PM Page 98