Filter
Top Products
INSPECTION
HYDRAULIC HOSES
Check hydraulic hoses (Figure 3) to make sure they are
not worn, frayed or defective.
Check the zerk grease fittings (Figure 9) at each end of
the mixing drum. These grease fittings lubricate the paddle
shaft bearings.
Figure 9. Grease Fittings (Bearings)
GREASE
FITTING
BEARING
Check the zerk grease fittings on the dump cylinder
(Figure 10). This grease fitting lubricates the hydraulic
dumping mechanism.
Figure 10. Grease Fittings (Dump Cylinder)
GREASE FITTING CAP
GREASE FITTING CAP
GREASE FITTING
GREASE FITTING
DUMP CYLINDER