Filter
Top Products
2-2 MH120 Wireless Telephone
Mobile Handset 120 and Desktop Charger/Gang Charger User Guide - Revision 1
Turning the Wireless Telephone On or Off
Use the following steps to turn on the MH120 Wireless Telephone.
Step 1 Press and hold the Power On/Start Call key for about one second. Two
chirps will sound.
Step 2 Release the Power On/Start Call key. The in-service tone sounds and
the extension number displays.
The Wireless Telephone is now in standby mode and ready to make and
receive calls.
Use the following step to turn off your MH120 Wireless Telephone.
Step While in standby mode, press and hold the Power Off/End Call key. One
chirp sounds and the Wireless Telephone turns off.
Making a Call
Use the following steps to make a call.
Step 1 Go Off Hook by pressing the Power On/Start Call key.
Step 2 Select a Line before dialing a number if you are required by your
telephone system to select one.
Step 3 Press the LINE key and the number key of the line you wish to use. You
may hear a dial tone.
Step 4 Dial the number. Calls should be dialed with the Wireless Telephone
exactly as with your desk phone.
Answering A Call
When an incoming call is received the Wireless Telephone rings or
vibrates to alert you of an incoming call. Additionally, a line number on
the display may flash, and the display may show information about the
call, such as caller's name and extension.
To answer a call, press the Power On/Start Call key, hold the earpiece
to your ear, and speak with a normal tone of voice.
NOTE
The Wireless Telephone can not be turned off during a call. End the call first and
then turn the Wireless Telephone off.
NOTE
You may dial extension numbers, internal numbers, or make external calls,
depending on the setup of your PBX. You may hear a dial tone, then press the
number keys to dial the number.