Filter
Top Products
MH120 Wireless Telephone 2-5
Mobile Handset 120 and Desktop Charger/Gang Charger User Guide - Revision 1
Using the Softkeys
The softkeys on your MH120 Wireless Telephone enable you to quickly
activate system features. There are four softkeys and up to 16 features
programmed for softkey access.
The display area directly above each softkey is programmed with a
feature abbreviation to guide your access to the feature. The softkeys
are referred to from left to right as A,B,C,D. In Figure 2-2 the
corresponding display area is labeled Aaaa, Bbbb, Cccc, and Dddd.
Figure 2-2
MH120 Wireless Telephone—display area highlighted
The softkeys operate with a toggle function. Press the left or right side
of the key to activate the corresponding softkey feature.
The first four primary softkey features are displayed in the softkey
function display area by default. Use the following steps to view all of
the features that can be activated through the softkeys.
Step 1 Briefly press the Power On/Start Call key to go off hook.
Step 2 Press the FCN key. The second set of feature abbreviations displays in
the softkey display area.
—Each time the FCN key is pressed, a different set of features displays
until all 16 possible features have been displayed.
—The softkey features display in the same sequence as they appear on
the shortcut menu.
Step 3 Press the corresponding softkey to activate any feature while its
abbreviation is displayed.
Earpiece
Right arrow
Voicemail icon
Shortcut menu & Main display area
Push-to-talk radio control
Softkey Function display area
Softkey D
Softkey C
Power Off/End Call
Menu
Battery release
Line
Microphone
(not to scale)
Charging contacts
Function
Battery release
Power On/Start Call
Softkey B
Softkey A
Down
Headset jack
Select
Up
Low battery icon
Left arrow
Line indicators