Filter
Top Products
2-6 MH120 Wireless Telephone
Mobile Handset 120 and Desktop Charger/Gang Charger User Guide - Revision 1
Activating Features With Shortcut keys
While scrolling through the softkey functions, a shortcut key may be
pressed to activate its corresponding feature, whether or not that
feature is currently displayed in the softkey function display area.
Because system features vary, your system administrator will explain
them in reference to your telephone system.
Example: Using the previous example for the Transfer function
described on
page 2-4: If the Transfer function is assigned to
softkey A in the second level row, then Xfr will display in the
Aaaa softkey display area when the FCN key is pressed.
If a call is in progress, do one of the following to activate the Transfer
feature:
•Press FCN + (softkey A) to transfer the call.
•Press FCN + 2 to use the shortcut key.
•Press MENU + 2.
Using Push to Talk (PTT)
The push-to-talk feature allows MH120 Wireless Telephones to operate
in a push-to-talk (PTT) group broadcast mode in addition to the
standard telephone operation. This feature is similar to Push-to-talk
radios, or walkie talkies.
The MH120 Wireless Telephone supports 8 multicast channels with the
current channel saved in memory on the phone. A PTT call is initiated by
pressing the Talk button located on the right side of the handset. All
MH120 Wireless PTT dialogue is interrupted when you answer a PBX call.
When the PBX call is ended, PTT dialogue resumes if it is an active call.
The different push-to-talk features and terminology are discussed in the
following sections.
Selecting a Channel
See “Setting User Preferences” on page 2-10.
REFERENCE
Refer to the example of using the shortcut keys on page 2-4 for more information
about using MENU + 2.