Filter
Top Products
NTI RACKMUX RACKMOUNT ANSI TERMINAL DRAWER
31
Supported VT100, VT220 and Console ANSI Commands (Cont'd)
final
Final character
final
Final character
A Designating UK ANSI character set < Designating DEC supplemental(VT220 only)
B Designating ASCII character set DSCS Designating Down-line loadable character set
0 Designating DEC special graphics
* DSCS can consist of zero, one or two intermediate character and a final character. Intermediate characters are
in the range of 2/0 to 2/15. Final characters are in the range of 3/0 to 7/14
Command
FUNCTION VT100, VT220 Console ANSI
Load G0 character set into GL CTRL O Same
Load G1 character set into GL CTRL N Same
Load G1 character set into GR ESC ~ Same
Load G2 character set into GL ESC n Same
Load G2 character set into GR ESC } Same
Load G3 character set into GL ESC o Same
Load G3 character set into GR ESC | Same
Shift G2 character set into GL for one character only ESC N Same
Shift G3 character set into GL for one character only ESC O Same
Controlling Character, Field, and Line Attributes
Define character attributes
*3
CSI Ps m (see table below) Same
Select Graphic Rendition
(Console ANSI mode only) CSI ps m (see table below)
Set bold background bit ESC[ =PnE same
Pn = 0: set bit 7 of attribute byte as B/G intensity
1: set bit 7 of attribute byte as B/G blink
Set normal foreground color ESC[ = Psn F (see table, same
Set normal background color ESC[ = Psn G next page) same
Set reverse foreground color ESC[ = Psn H same
Set reverse background color ESC[ = Psn I same
Set graphic foreground color ESC[ = Psn J same
Set graphic background color ESC[ = Psn K same
Set border color ESC[ = Psn A same
Values for “ Ps” (above)
Ps
Character Attribute
Ps
Character Attribute
0 Normal (all attributes off) 33 Brown character (Bold on = Yellow)
1 Bold (blank off) 34 Blue character
4 Underline 35 Magenta character
5 Blink 36 Cyan character
7 Reverse 37 White character
8 Blank (bold off) 40 Black background
22 Normal intensity 41 Red background
24 Underline off 42 Green background
25 Blink off 43 Brown background (Bold on = Yellow)
27 Reverse off 44 Blue background
28 Blank off 45 Magenta background
30 Black character 46 Cyan background
31 Red character 47 White background
32 Green character
Values for “ps” (above)
ps
Function
10 Select Primary Font
11 Select First Altemate Font. Allows ASCII characters less than 32 to be displayed as ROM character.
12 Select Second Alternate Font. Toggles high bit of extended ASCII code before displaying as ROM character.