Filter
Top Products
Memory linking:
The memory linking function allows two or more mem-
ory locations to be linked. This permits long strings of
characters, such as a phone number with an accom-
panying DTMF string, to be sent without having to
access manually more than one location.
To link two locations:
Enter the phone number, then a
‘+’ character (press
**
) and the number of the
second memory location. Store this in the first location.
Enter the DTMF string, and store this in the second
location.
To send the DTMF string:
Recall and dial the phone
number in the first location. When the call is
established, press MENU SEND to send the DTMF
string in the second location. For full details, refer to
‘Send DTMF (Menu 17)’, page 46 and ‘To join two
memory locations’, page 48.
STORING INFORMATION
ᕡ With number mode selected, enter the phone
number. Remember to include the area code,
and any international code, if necessary. To use
‘+’ as the international prefix; press
**
.
· If you wish to enter a name, press ABC to select
alpha mode, then enter the name (for further
details, refer to ‘Entering a Name’, page 24).
All stored names must be different. You cannot
store a name that is already stored in any of the
memory locations 1-69 or 90-98.
NOTE:
When you wish to store a number and a
name, always do this as one operation.
» Press STO. The message
STORE
prompts you to
specify a memory location number.
¿ If you want to store the information in the next free
location, as indicated by the number in the upper
right hand corner of the display, just press STO.
Otherwise, enter a memory location number of
your choice (1 to 69 or 90-98). If entering a one-
digit number (i.e. for locations 1-9), you may press
STO again to complete the operation or wait a
moment for the message
STORED
to appear.
22