Filter
Top Products
Clear Last Call (Menu 10)
This function allows you to set the phone to clear, or
retain, (automatically) the last numbers dialed when the
phone is switched off. The phone automatically stores
the last five numbers dialed; refer to ‘Last Number
Redial’, page 16, for further details.
To clear or retain the last numbers dialed:
³ Press MENU 1 0.
· Press or to select
CLEAR LAST ON
(to clear
the numbers) or
CLEAR LAST OFF
(to retain the
numbers).
» Press STO to confirm the setting.
Change Lock Code (Menu 11)
This function allows you to change the lock code of
your phone. (You will need to enter your security code
in order to change the lock code.)
To change the lock code:
³ Press MENU 1 1. The message
SECURITY?
prompts you to enter your security code.
· Enter the five-digit security code (default 12345),
and press STO. If you entered an incorrect code,
the message
CODE ERROR
will appear. When
you have entered the correct security code, the
message
NEW CODE?
prompts you to enter your
new lock code.
» Enter the new four-digit lock code and press STO.
The code may contain numeric digits only; other
characters (e.g. #,
*
) are not allowed. The mes-
sage
STORED
confirms that the new lock code
has been set.
Data Mode (Menu 12)
This function allows you to send data, while in a call.
Your phone must be connected to a Handsfree Car Kit
or a data-compatible accessory in order to send data.
To send data:
³ Press MENU 1 2. You must have a call in progress,
otherwise the message
NO CALL ACTIVE
is
41