Filter
Top Products
Navi Bars
GB 29
Picture format
If you have a TV set with a 4:3 picture format and the transmission
is 16:9, you can select "Fullscreen" or "Letterbox".
Fullscreen will fill the screen but some information on the left and
right sides will be cut off.
Letterbox will give a complete picture, but black areas will be
visible at the top and bottom of the screen.
Settings folder — Access
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
The following settings can be altered from this menu.
Access Control
Select "Yes" or "No" to turn the access control for all menus on or
off. NOTE: even when "No" has been selected, the access code must
still be entered before you can watch locked channels.
Receiver lock
If you select "Yes", you will have to enter the access code every time
you activate the Mediamaster from standby mode.
Age rating control
If you want everybody to have access to all available types of
programs, select "No".
If you select "Yes", you may block programs that are unsuitable for
children.
Age Limit
Select an age limit between 3 and 18 on the line that appears.
You should be aware, however, that not all Service Providers have
implemented the necessary codes for these functions in their
transmissions.
Change access code
You can change the access code from the standard factory
setting of 1234.
NOTE: do not forget your access code as without it, you will
not have access to any of the functions that require the code.
Settings folder — Time
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
The time is adjusted using the cursor up/down button, half an
hour at a time. You can also adjust the minutes using the cursor
left/right button.
'fullscreen'
'letterbox'