Filter
Top Products
Getting started
Copyright © 2004 Nokia. All rights reserved. 3
2. Getting started
■ Installing the card and
the battery
Keep all miniature cards out of the
reach of small children.
• The card and its contacts can
easily be damaged by scratches
or bending, so be careful when
handling, inserting or removing
the card.
• Before installing the card, always
make sure that the phone is
switched off and disconnected
from any enhancement.
1. Remove the back cover from the
phone. With the back of the
phone facing you, push the back
cover release button (1) and slide
the back cover off (2).
Remove the battery by lifting it
with the finger grip (3).
2. Release the card holder. Gently
pull the locking clip of the card
holder (4) and open it (5).
3. Insert the card into the card
holder (6). Make sure that the
card is properly inserted and that
the golden contact area on the
card is positioned as shown.
4. Close the card holder (7) and
press it until it snaps into
position.
5. Insert the battery (8).
6. Slide the back cover into its place
(9).