Filter
Top Products
Using the menu
Copyright © 2004 Nokia. All rights reserved. 21
Dialling a number using voice
dialling
Note: You must say the
name exactly as you said it
when you recorded it.
1. In standby mode, press and hold
the right softkey (Contacts or Go
to) for two seconds.
A tone is heard and Speak now is
displayed.
2. After the tone, clearly speak the
voice tag that you recorded
previously into the microphone.
Note: If the voice tag is
not recognized by the
phone or if you fail to
speak a tag within three
seconds after the tone,
the message Name not
found is displayed, and
you are returned to the
standby mode.
3. When the voice tag is recognized:
- The phone book entry will be
displayed for three seconds.
- The voice tag is replayed
(through the ear piece).
- After three seconds, the
number is dialled.
The only other option for initiating
voice dialling is to press the headset
button momentarily while in
standby mode. The alert tones play
through the headset. Speak the voice
tag into the headset microphone.
The voice tag will playback through
the headset to confirm your choice.
For further information on voice
dialling and voice commands see
Voice on page 29.
■ Profiles
(Menu 4)
Your phone has
various setting groups, called
profiles, for which you can
customise the phone tones for
different events and environments.
Press Menu, and select Profiles.
Scroll to a profile and press Select.
• To activate the selected profile,
select Activate.
• To personalise the profile, select
Personalise. Select the setting
you want to change and make
the changes.
• To set the profile to be active for
a certain amount of time up to 24
hours, select Timed and set the
end time. When the time set for
the profile expires, the previous
profile that was not timed,
becomes active.