Filter
Top Products
Messages (Menu 1)
26 Copyright © 2004 Nokia. All rights reserved.
Be precise; you will need this
information in Setup voice mail with
dialling codes, 26.
Insert dialling codes
Press the * key repeatedly to cycle
through dialling codes. Once the
desired code appears in the display,
pause briefly and the code is inserted
into the dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions.
+—International dialling access.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
w—Waits for you to press the Talk
key before sending the numbers or
codes that follow.
Setup voice mail with dialling
codes
1. At the standby mode, select
Contacts > Speed dials.
2. Scroll to an empty speed dialling
slot and press Assign.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes and enter
any codes as necessary using the
information that you wrote down
from Write down voice mailbox
number and process, 25.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and press OK.
6. Enter a name (such as Voice
Mail), and press OK.
To dial and listen to your voice mail,
press and hold the assigned speed
dialling key at the standby mode.
Note: If Speed dialling is off,
the phone displays a prompt
asking if you would like to
turn on speed dialling.