Filter
Top Products
Copyright © 2004 Nokia. All rights reserved. 55
Settings (Menu 5)
3. Enter the new lock code (up to 10
characters), and press OK.
4. Enter the new lock code again,
and press OK.
Restrict calls
Call restriction is a network service.
See Network services, ix for more
information.
If your wireless service providers
supports this feature, then you can
restrict the calls your phone can
make and receive. When calls are
restricted, calls still may be possible
to the official emergency number
programmed into your phone.
Note: Contact your service
provider for the restriction
password.
1. At the standby mode, select
Menu > Settings > Security
settings > Call restrictions.
2. Enter the lock ode and press OK.
(See Lock code, 54 for more
information.)
3. Select the type of calls you wish
to restrict:
Restrict outgoing calls—Calls
cannot be made.
Restrict incoming calls—Calls
cannot be received.
4. Scroll to an option (Select, Add
restriction, Edit, or Delete), and
press Select.
Voice privacy
Voice privacy is a network service.
See Network services, ix for more
information. If your wireless service
provider supports this feature, the
voice privacy feature protects the
privacy of your current phone
conversation from other callers
placing phone calls on your same
network.
At the standby mode, select Menu >
Settings > Security settings > Voice
privacy > On or Off.
■ Network
The following features are network
services. See Network services, ix for
more information. The menu options
you see in your phone are based on
your service provider’s network. The
network determines which options
actually appear in the phone menu.
Check with your service provider for
more information.
The Network menu allows you to
personalise the way your phone
chooses a network in which to
operate while you are within or
outside of your primary or home
system. Your phone is set to search
for the most cost-effective network.
If your phone cannot find a preferred
network, it selects a network
automatically based on the option
you choose in the Network menu.
1. At the standby mode, select
Menu > Settings > Network.