Filter
Top Products
Settings (Menu 5)
46 Copyright © 2004 Nokia. All rights reserved.
■ Call settings
Anykey answer
Anykey answer allows you to answer
an incoming call by briefly pressing
any key except the Power key, Right
selection key, or End key.
At the standby mode, select Menu >
Settings > Call settings > Anykey
answer > On or Off.
Automatic redial
Occasionally, your network may
experience heavy traffic, resulting in
a fast busy signal when you dial.
With automatic redial activated,
your phone redials the number
(number of redials depends on your
wireless service provider), and
notifies you once the network is
available.
At the standby mode, select Menu >
Settings > Call settings > Automatic
redial > On or Off.
Speed dialling
You can activate or deactivate speed
dialling. For more information, see
Set up speed dialling, 31.
Calling cards
If you use a calling card for long
distance calls, you can save the
calling card numbers in your phone.
Your phone can store up to four
calling cards.
Save information
1. At the standby mode, select
Menu > Settings > Call settings >
Calling card.
2. Enter your lock code, and press
OK. (See Lock code, 54 for more
information.)
3. Scroll to one of the four memory
locations, and select Options >
Edit > OK > Dialling sequence.
4. Select one of the following
sequence types:
Access no.+ phone no.+ card no.—
Dial access number, phone
number, then card number (+ PIN
if required)
Access no.+ card no.+ phone no.—
Dial access number, card number
(+ PIN if required), then phone
number
Prefix+ phone no.+ card no.—Dial
the prefix (numbers that must
precede the phone number) and
phone number you want to dial,
then card number (+ PIN if
required)
5. Enter the required information
(access number or prefix and card
number), and press OK to confirm
your entries.
6. Select Card name.
7. Enter the card name, and press
OK.
Note: Contact your calling
card company for more
information.