Filter
Top Products
Copyright © 2004 Nokia. All rights reserved. 61
Voice (Menu 6)
Note: Do not press Quit
unless you want to cancel the
recording.
The phone replays and then saves
the recorded tag. The icon
appears next to commands which
have voice tags assigned.
Activate a voice command
After you have associated a voice
tag with a phone function, you can
issue a command by speaking the
voice tag.
1. Press and hold Contacts (or Go
to).
2. When Speak now appears,
pronounce the voice tag clearly
into the microphone.
When the phone finds the voice tag,
Found: appears, and the phone plays
the recognised voice tag through the
earpiece. The function you requested
is activated.
Options
After you have associated a voice
tag to a command, you can choose
one of the following options:
•Select Playback to listen to the
voice command tag.
•Select Change to change the
voice command.
•Select Delete to erase the voice
command tag.
■ Voice recorder
This feature allows you to record
pieces of speech or sound with your
phone and listen to them later. You
can also use recorded speech or
sound as ring tone. The total
available time is approximately 3
minutes if no memos have been
stored. The maximum length of a
recording depends on how much
memory remains available.
The recorder cannot be used when a
data call connection is active.
Record speech or sound
1. At the standby mode, select
Menu > Voice > Voice recorder >
Record.
2. After the recorder start tone is
heard, begin recording speech or
sound.
3. When you are finished recording,
press Stop.
Options
After you have saved the recording,
select Menu > Voice > Voice
recorder > Recordings list, highlight
the recording from the Recordings
folder in the Gallery menu, and
choose one of the following options:
Open—Open and play the selected
recording.
Delete—Delete the selected
recording from the Recordings list.