Filter
Top Products
Call settings
Call settings
Select Menu > Settings. Select Calling > Call and from the following:
● Send my caller ID — Select Yes to show your phone number to the person you
are calling. To use the setting agreed upon with your service provider, select Set
by network) (network service).
● Call waiting — Activate your device to notify you of incoming calls while you
are in a call (network service), or check whether the function is activated.
● Reject call with message — Activate rejecting a call with a text message to
inform the caller why you could not answer the call.
● Message text — Write the standard text message that is sent when you reject
a call.
● Automatic redial — Set your device to make a maximum of 10 attempts to
connect the call after an unsuccessful call attempt. To stop automatic redialling,
press the end key.
● Show call duration — Set the length of a call to be displayed during the call.
● Summary after call — Set the length of a call to be displayed after the call.
● Speed dialling — Activate speed dialling.
● Anykey answer — Activate anykey answer.
● Line in use — This setting (network service) is shown only if the SIM card
supports two subscriber numbers, that is, two phone lines. Select which phone
line you want to use for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If you select Line 2 and
have not subscribed to this network service, you are not able to make calls. When
line 2 is selected,
is shown in the home screen.
● Line change — Select to prevent line selection (network service), if supported
by your SIM card. To change this setting, you need the PIN2 code.
Call divert
Select Menu > Settings and Calling > Call divert.
Settings
© 2010 Nokia. All rights reserved.152