Filter
Top Products
Copyright © 2008 Nokia. All rights reserved. 21
Your device
Lock code
The lock code (5 digits) helps to lock your device. The preset
code is 12345. Change the code, and set the device to
request the code.
When the device or keypad is locked, calls may be possible
to the official emergency number programmed into your
device.
PIN codes
The personal identification number (PIN) code or the
universal personal identification number (UPIN) code (4 to
8 digits) help to protect your SIM card. The (U)PIN code is
usually supplied with the SIM card. Set the device to
request the code each time the device is switched on.
The PIN2 code may be supplied with the SIM card and is
required for some functions.
The module PIN is required to access the information in the
security module. The signing PIN is required for the digital
signature. The module PIN and the signing PIN are supplied
with the SIM card if the SIM card has a security module in
it.
PUK codes
The personal unblocking key (PUK) code or the universal
personal unblocking key (UPUK) code (8 digits) are required
to change a blocked PIN code and UPIN code, respectively.
The PUK2 code is required to change a blocked PIN2 code.
If needed, contact your local service provider for the codes.
Barring password
The barring password (4 digits) is required when using call
barring. You can obtain the password from your service
provider. If the password is blocked, contact your service
provider.
Remote lock
You can lock your device and memory card remotely using
a text message. To enable remote locking and to define the
text message content to be used, select > Settings >
Phone sett. > General > Security > Phone and SIM card
> Remote phone locking > Enabled. Enter the text
message content (5 to 20 characters), verify it, and enter
the lock code.