Filter
Top Products
Messages (Menu 1)
24
Note: Voice mail services
vary by service provider. The
following instructions are
examples of common
operations. Please check with
your service provider for
specific instructions for using
your voice mail service.
Write down voice mailbox
number and process
1. Write down your voice mailbox
number.
2. Call and check your voice mail as
you normally would.
3. Write down your interaction with
the recorded prompts step-by-
step. Keep in mind that each
voice mail service may vary.
However, it should look
something like this:
Dial 2145551212, pause 5
seconds, press 1, pause 2
seconds, press 1234, press #.
Be precise; you will need this
information in Setup voice mail with
dialling codes, 24.
Insert dialling codes
Press * repeatedly to cycle through
dialling codes. Once the desired code
appears in the display, pause briefly
and the code is inserted into the
dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions.
+—International access.
p—Pauses for 2.5 seconds before
sending any numbers that follow.
w—Waits for you to press the Talk
key before sending the numbers or
codes that follow.
Setup voice mail with dialling
codes
1. In the standby mode, select
Contacts > Speed dials.
2. Scroll to an (empty) speed
dialling slot and press Assign.
3. Enter your voice mailbox number,
including the area code.
4. Refer to dialling codes and enter
any codes as necessary using the
information that you wrote down
from Setup voice mail with
dialling codes, 24.
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice after the voice
mailbox number, for example,
2145551212pp.
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and press OK.
6. Enter a name (such as Voice
Mail), and press OK.
To dial and listen to your voice mail,
press and hold the assigned speed
dialling key in the standby mode.