Filter
Top Products
49
Voice (Menu 7)
English
The phone replays and saves the
recorded tag. The icon appears
next to commands which have voice
tags assigned.
Activate a voice command
After you have associated a voice
tag with a phone function, you can
issue a command by speaking the
voice tag.
1. Press and hold Contacts.
2. When Please speak now appears,
pronounce the voice tag clearly
into the microphone.
When the phone finds the voice tag,
Found appears, and the phone plays
the recognised voice tag through the
earpiece. The function you requested
is activated.
Options
After you have associated a voice
tag to a command, you can choose
one of the following options:
•Select Playback to listen to the
voice command tag.
•Select Change to change the
voice command.
•Select Delete to erase the voice
command tag.
■ Voice recorder
This feature allows you to record
pieces of speech or sound with your
phone and listen to them later. The
total available time is 30 seconds if
no memos have been stored. The
maximum length of a recording
depends on how much memory
remains available.The voice recorder
cannot be used when a data call
connection is active.
Record speech or sound
1. In the standby mode, select Menu
> Voice > Voice recorder >
Record.
2. After the recorder start tone is
heard, begin recording speech or
sound.
3. When you are finished recording,
press Stop.
4. Enter the title you wish to assign
to the recording, and press OK.
Options
After you have saved the recording
to the Recordings list, highlight the
recording, and choose one of the
following options:
•Select Playback to listen to the
recording using the earpiece.
•Select Delete to erase the
recording.
•Select Edit title to rename the
recording.
•Select Add alarm to add an alarm
to the recording.