Nokia 6120 Cell Phone User Manual


 
5
2. Getting Connected
So youve just bought your new phone, taken it out of
the box, and youre wondering what to do next. Well,
this chapter will help get you started.
Installing your battery
Simply place the battery in the grooves on the back of
your phone. Then slide the battery upward until it clicks.
Note: Use only those batteries approved by the phone manu-
facturer and recharge your battery only with the chargers
approved by the manufacturer.
See Important Battery Information on page 8.
Charging your new battery
Your phone can be used with either a rechargeable
Li-Ion or NiMH battery. Note that a new battery's full
performance is achieved only after two or three
complete charge and discharge cycles.
With your phone on or off, simply connect the lead from
the charger to the bottom of your phone or place it on
a charging stand. Then connect the charger to a
standard 120V AC outlet.
When the battery begins charging, your phone will beep
once and the battery strength indicator on the right side
of the display will scroll.