Filter
Top Products
11
■ Charge the battery
Connect the charger to a wall socket.
Connect the charger plug to the charger
connector in the phone.
If the battery is completely discharged, it
may take a few minutes before the
charging indicator appears on the display
or before any calls can be made.
The charging time depends on the charger
and the battery used. Charging a BL-5B
battery with the AC-4 charger takes approximately 80 minutes.
Tip: To save battery power, you can use the phone only in the GSM
network. Select Menu > Settings > Phone sett. > Phone > Network >
Network mode > GSM. When the GSM network is selected, you do not have
all UMTS (3G) services available.
■ Switch the phone on and off
Press and hold the power key.
If the phone asks for a PIN code, enter the PIN code, and select OK.
If the phone asks for the lock code, enter the lock code, and select
OK. The factory setting for the lock code is 12345.
To set the correct time zone, time, and date, select the country you
are presently in, then enter the local time and date.
■ Normal operating position
Use the phone only in its normal operating position.
During extended operation, such as an active video call or high
speed data connection, the device may feel warm. In most cases,
this condition is normal. If you suspect the device is not working
properly, take it to the nearest authorized service facility.