Filter
Top Products
46
Lock code
You’ll need the lock code to activate and deactivate Phone
Lock (
see page62
), or to change your lock code. The default
lock code is 1234 (or the last four digits of your phone
number, depending on your service provider). If you enter
an incorrect lock code five times in a row,
your
phone will
prompt you for the security code (
see page 70
).
Changing your lock code
In a lock code, only numeric characters are accepted.
1.
Enter
Menu
4-3-2-3 (
Settings
-
Security settings
-
Access codes
-
Change lock code
).
2.
Enter lock code at
Enter lock code:
and press
OK
.
3.
Enter new lock code, press
OK
.
4.
Verify new lock code, press
OK
.
Note: When you change your lock code, make sure you
store it in a safe place, away from your phone. Avoid
entering access codes similar to emergency numbers
to prevent accidental emergency calls.
Manual touch tones
This setting determines how long touch tones are produced
as you press the keys on the keypad. Note that touch
tones are sometimes called DTMF tones.
Note: See “Touch tone length” on page 74 for details.
Setting manual touch tones
Press
Menu
4-2-3-1 (
Settings
-
Phone settings
-
Touch
tones
-
Manual touch tones
) and highlight one of the
following options, then press
OK
.
Continuous
means the tone sounds for as long as
you press and hold the key.
Fixed
sets the tone length to .1 second, regardless
of how long you press the key.
Off
turns the tones off, and no tones will be sent
when you press the keys.