Filter
Top Products
Contacts
32 Copyright © 2005 Nokia. All rights reserved.
6. Contacts
The contacts list can hold up to 500
contacts with multiple numbers and
text notes for each contact. The
amount of numbers and text entries
that you can save may vary,
depending on length and the total
number of entries in the contacts list.
■ Add new contacts
To add a new contact:
1. In the standby mode, select
Menu > Contacts > Add new.
2. Enter the name, and select OK.
3. Enter the phone number, and
select OK > Done.
Save contact name and
number
1. In the standby mode, use the
keypad to enter the phone
number you wish to save.
2. Select Save.
3. Enter the name, and select OK.
Save contact number only
1. In the standby mode, use the
keypad to enter the phone
number you wish to save.
2. Press and hold Options.
Setup phone numbers with
dialling codes
Dialling codes instruct the receiving
system to pause, wait, bypass or
accept the numbers that follow
them in the dialling string.
1. In the standby mode, select
Menu > Contacts > Speed dials.
2. Scroll to an (empty) speed
dialling slot and select Assign.
3. Enter the phone number,
including the area code.
4. Refer to dialling codes and enter
any codes as necessary.
For example, if you pause for 5
seconds after connecting to the
dialled number, enter p twice
(two times 2.5 seconds) after the
number: 2145551212pp.
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and select OK.
6. Enter a name (such as Voice
Mail), and select OK.
To dial and listen to your
programmed number, press and hold
the assigned speed dialling key in
the standby mode.