Filter
Top Products
Settings
58 Copyright © 2005 Nokia. All rights reserved.
1. In the standby mode, select
Menu > Settings > Security
settings.
2. Enter the lock code, and select
OK. See ”Change lock code” on
page 58.
3. Select Allowed number. when
phone locked. Highlight an empty
folder and select Assign and enter
the phone number; or select
Assign > Search to recall the
number from Contacts. Select OK.
Call the allowed phone
number
1. In the standby mode, press the
joystick down and highlight the
contact you wish to call.
2. Press the call key to place the call.
Change lock code
Avoid using codes similar to
emergency numbers such as 000 or
111 to prevent accidental dialing of
the emergency number.
The preset lock code is 12345 or the
last four digits of your phone
number. If you enter an incorrect lock
code five times in a row, your device
will prompt you for the lock code.
If you enter the wrong lock code 5
times in succession, you will not be
able to enter a code for 5 minutes,
even if you power off the device
between incorrect entries.
1. In the standby mode, select
Menu > Settings > Security
settings > Change lock code.
2. Enter the new lock code (must be
4 characters in length), re-enter
the new lock code for
verification, and select OK.
3. Reenter the new lock code for
verification, and select OK.
When you change your lock code,
make sure you store it in a safe
place, away from your device. Avoid
entering access codes similar to
emergency numbers to prevent
accidental emergency calls.
Call restrictions
Call restrictions is a network service.
See ”Network Services” on page viii.
If your wireless service provider
supports this feature, you can
restrict the calls your device makes
and receives. When calls are
restricted, calls still may be possible
to the official emergency number
programmed into your device.
Contact your service provider for the
restriction password.
1. In the standby mode, select
Menu > Settings > Security
settings > Call restrictions.