Filter
Top Products
Settings
Copyright © 2005 Nokia. All rights reserved. 55
Handsfree operation with
voice commands
You can set as many as five voice
commands, which allow handsfree
operation of certain features in your
device.
Assign a voice tag to a
command
Before using voice commands, you
must first add a voice tag to the
device function.
1. In the standby mode, select
Menu > Settings > Voice
commands.
2. Select the device function you
wish to tag: Profiles, Voice
mailbox, Radio, Infrared, Voice
recorder or Call register.
3. If necessary, select Add for the
chosen option associated with
that function.
4. Select Start, and speak the voice
tag clearly into the microphone.
Do not select Quit unless you
want to cancel the recording
The device replays and saves the
recorded tag. The
icon appears
next to commands that have voice
tags assigned.
Activate a voice command
After you have associated a voice
tag with a function in your device,
you can issue a command by
speaking the voice tag.
1. In the standby mode, press and
hold the Right selection key.
2. When Speak now displays,
pronounce the voice tag clearly
into the microphone.
Select Playback to listen to the voice
command tag.
When the device finds the voice tag,
Found: displays, and the device plays
the recognised voice tag through the
earpiece. The function you requested
is activated.
Options
After you have associated a voice
tag to a command, you can select
one of the following options:
Change — Change the voice command.
Delete — Erase the voice command tag.
■ Enhancement settings
The enhancement settings menu is
shown only if the device has been
connected to a compatible
enhancement. In the standby mode,
select Menu > Settings > Enhancement
settings > Headset, Handsfree,
Loopset, Text phone or Charger.