Filter
Top Products
Contacts
Copyright © 2005 Nokia. All rights reserved. 35
■ Speed dialling
Set up speed dialling
You can associate any entry in the
contacts list with a key from 2–9;
then dial those entries by pressing
and holding the assigned key.
Assign a key to speed dialling
1. In the standby mode, select
Menu > Contacts > Speed dials.
2. Scroll to an (empty) speed
dialling slot, and select Assign.
3. Enter the number (including the
area code), and select OK; or
select Search to retrieve a
number from the contacts list.
4. Enter a name for the number, and
select OK. If speed dialling is off,
the device displays a prompt
asking if you would like to turn
speed dialling on.
5. Select Yes to activate speed
dialling.
Change speed dialling numbers
1. In the standby mode, select
Menu > Contacts > Speed dials.
2. Scroll to the speed dialling entry
you wish to change, and select
Options > Change.
3. Enter the new number; or select
Search to retrieve a number from
the contacts list, and select OK.
4. Enter a name for the entry, and
select OK.
Delete speed dialling numbers
1. In the standby mode, select
Menu > Contacts > Speed dials.
2. Scroll to the speed dialling
location you wish to delete, and
select Options > Delete > Yes.
■ Voice tags
You can dial up to 25 stored numbers
using voice dialling.
Before using voice tags, note that:
• Voice tags are not
language-dependent. They are
dependent on the speaker’s voice.
• You must say the name exactly as
you said it when you recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags and use them in a quiet
environment.
• Very short names are not accepted.
Use long names and avoid similar
names for different numbers.
Note: Using voice tags may
be difficult in a noisy
environment or during an
emergency, so you should not
rely upon voice dialling in all
circumstances.