Filter
Top Products
Settings
62 Copyright © 2005 Nokia. All rights reserved.
■ Restore factory settings
You can reset some of the menu
settings to their original values. Data
that you have entered or downloaded
is not deleted, for example, entries in
your contacts list are not affected.
1. In the standby mode, select
Menu > Settings > Restore
factory settings.
2. Enter the lock code, and select
OK. See ”Security settings” on
page 57.
■ Infrared
You can set up the device to receive
data through its IR port. To use an IR
connection, transmission and
reception must be to or from an IR
compatible phone or device. You can
send or receive data such as business
cards, graphics, images, sound clips,
music files, videos, and calendar
notes to or from a compatible phone
or data device (such as a computer)
using the IR port of your device.
Do not point the IR (infrared) beam
at anyone’s eye or allow it to
interfere with other IR devices. This
device is a Class 1 laser product.
Send and receive data
1. Ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that
there are no obstructions
between the devices.
The preferable distance
between the two devices in an
IR connection is from 3 inches
to 3 feet.
2. Activate IR in your device by
selecting Menu > Settings >
Infrared.
3. The user of the other device
should activate IR as well.
If data transfer is not started within
two minutes after the activation of
the IR port, the connection is
cancelled and must be restarted.
Connection indicator
•When shows continuously,
the IR connection is activated
and your device is ready to send
or receive data using its IR port.
•When blinks, your device is
either trying to connect to the
other device or a connection has
been lost.