Filter
Top Products
Switch the device on and off
Press and hold the power key to
switch the device on and off.
Press the power key briefly to
end a call or close an application.
If the device asks for a PIN code,
enter the PIN code, and select
OK.
If the device asks for the lock
code, enter the lock code, and
select OK. The factory setting for
the lock code is 12345.
To set the correct time zone,
time, and date, select the
country you are presently in,
then enter the local time and date.
Antenna locations
Your device may have internal and external antennas. As with
any radio transmitting device, avoid touching the antenna
area unnecessarily while the antenna is transmitting or
receiving. Contact with such an antenna affects the
communication quality and may cause the device to operate
at a higher power level than otherwise needed and may
reduce the battery life.
Configuration settings
Before you can use multimedia messaging, e-mail,
synchronisation, streaming, and the browser, you must have
the proper configuration settings in your device. Your device
may automatically configure browser, multimedia
messaging, access point, and streaming settings based on
the SIM card used. If not, you can use the Settings wizard
application to configure the settings. You may receive the
settings as a configuration message that you can save to your
device. For more information on availability, contact your
service provider or nearest authorised Nokia dealer.
When you receive a configuration message, and the settings
are not automatically saved and activated, 1 new message
is displayed. To save the settings, select Show > Options >
Save. You may need to enter a PIN code provided by the
service provider.
Settings wizard
Select > Settings > Sett. wizard.
Get started
© 2009 Nokia. All rights reserved. 11